5052 is the most widely used non-heat-treatable aluminium sheet alloy, alloyed with about 2.5% magnesium and a trace of chromium. It combines very good marine corrosion resistance with excellent formability and weldability, and work hardens predictably, which makes it ideal for pressed, folded and deep-drawn sheet metal work.
Sarovar Tube Industries manufactures, stocks and exports 5052 Aluminium Sheet from Mumbai to customers across the Middle East, South East Asia, Europe, Africa and the Americas. Every heat is verified by in-house testing before despatch and supported by complete documentation, so the material you receive is exactly the material you specified.
The table below sets out the standard manufacturing range for 5052 Aluminium Sheet. Sizes and finishes outside this range are produced against firm orders.
| Parameter | Details |
|---|---|
| Thickness Range | 0.5 mm to 5.0 mm |
| Width | 1000 mm, 1220 mm, 1250 mm, 1500 mm, 2000 mm |
| Length | 2000 mm, 2440 mm, 2500 mm, 3000 mm, coil lengths |
| Form | Cold rolled sheet, coil, strip, shim, blanks, chequered sheet |
| Surface | Mill finish, 2B, BA, No.4 brushed, PVC coated, anodised |
| Edge | Mill edge, slit edge, deburred |
| Dimensional Standard | ASTM A480 / B209 / EN 485 as applicable |
| Value Addition | Shearing, laser cutting, bending and forming to drawing |
| Description | Details |
|---|---|
| Primary Standard | ASTM B209 / EN 485, UNS A95052 |
| Grade Designation | 5052 Aluminium |
| Equivalent Grades | AA 5052, EN AW-5052, DIN 3.3523, AlMg2.5 |
| Product Category | Aluminium - Sheets & Plates |
| Certification | EN 10204 3.1 as standard, 3.2 with third party inspection on request |
| Thickness (mm) | Standard Width (mm) | Standard Length (mm) | Typical Supply |
|---|---|---|---|
| 0.5 - 0.8 | 1000 / 1250 | 2000 / 2500 | Sheet / coil |
| 1.0 - 1.5 | 1250 / 1500 | 2500 / 3000 | Sheet / coil |
| 1.6 - 2.0 | 1250 / 1500 | 2500 / 3000 | Sheet |
| 2.5 - 3.0 | 1500 / 2000 | 3000 / 6000 | Sheet |
| 3.5 - 4.0 | 1500 / 2000 | 3000 / 6000 | Sheet |
| 4.5 - 5.0 | 1500 / 2000 | 3000 / 6000 | Sheet / light plate |
Thickness and width tolerances per the governing product standard. Slit coil and cut blanks supplied to customer sizes.
Composition limits in weight percent as required by ASTM B209 / EN 485, UNS A95052. Every heat is verified by spectrographic analysis and positive material identification.
| Element | Composition (%) |
|---|---|
| Magnesium (Mg) | 2.2 - 2.8 |
| Chromium (Cr) | 0.15 - 0.35 |
| Iron (Fe) | 0.40 max |
| Silicon (Si) | 0.25 max |
| Copper (Cu) | 0.10 max |
| Manganese (Mn) | 0.10 max |
| Zinc (Zn) | 0.10 max |
| Aluminium (Al) | Balance |
Minimum room temperature properties in the supplied condition. Results for the actual heat supplied are recorded on the mill test certificate.
| Property | Value |
|---|---|
| Tensile Strength (H32) | approx. 230 MPa |
| Yield Strength (H32) | approx. 195 MPa |
| Elongation | approx. 12% |
| Hardness | approx. 60 HB |
| Modulus of Elasticity | 70.3 GPa |
| Density | 2.68 g/cm3 |
Material is released only after the following checks are completed and recorded:
5052 Aluminium Sheet is specified across the following industries and services:
All material is manufactured and tested to ASTM B209 / EN 485, UNS A95052. Equivalent grades include AA 5052, EN AW-5052, DIN 3.3523, AlMg2.5. The governing standard is printed on every mill test certificate.
Every consignment ships with an EN 10204 3.1 mill test certificate covering heat-wise chemical analysis and mechanical properties. Type 3.2 certification with third party inspection by TUV, SGS, BV or Lloyd's is available when specified at the enquiry stage.
Yes. Beyond the standard range shown above we manufacture to customer drawings and specifications, including special lengths, non-standard wall thickness and machined profiles. Share your drawing with the enquiry and our technical team will confirm feasibility and lead time.
Stock items are despatched within three to five working days of order confirmation. Made-to-order material typically takes four to six weeks depending on grade, size and heat treatment requirements. Export documentation and packing are handled in house.
Custom fabrication, special sizes and complete export documentation are handled in house. Send us your drawing or specification and our technical team will come back with a detailed offer, usually within one working day.