Stainless Steel Sheets & Plates are used across food processing, architecture, chemical plants and kitchen equipment for their corrosion resistance and hygienic, low-maintenance surface. Available in hot rolled and cold rolled form across a wide range of finishes.
Sarovar Tube Industries supplies SS sheets and plates in 304, 304L, 316, 316L, 202 and 430 grades to ASTM A240 specification, in No.1, 2B, BA, No.4 (brushed) and mirror finish, with custom slitting and cut-to-size service.
The table below sets out the standard manufacturing range. Sizes and finishes outside this range are produced against firm orders.
| Parameter | Details |
|---|---|
| Thickness Range | 0.3 mm to 100 mm |
| Sheet Size | 1000x2000, 1250x2500, 1500x3000 mm (custom on request) |
| Finish | No.1, 2B, BA, No.4 (brushed), mirror |
| Manufacturing | Hot rolled, cold rolled |
| Dimensional Standard | ASTM A480 |
| Tolerance | As per ASTM A480 specification |
| Description | Details |
|---|---|
| Primary Standard | ASTM A240 Grade 304 / 304L / 316 / 316L |
| Equivalent Grades | DIN 1.4301, 1.4404; JIS SUS304, SUS316 |
| Product Category | Stainless Steel - Sheets & Plates |
| Certification | EN 10204 3.1 as standard, 3.2 on request |
| Thickness (mm) | Weight (kg/m²) |
|---|---|
| 0.5 | 3.95 |
| 0.8 | 6.32 |
| 1.0 | 7.90 |
| 1.2 | 9.48 |
| 1.5 | 11.85 |
| 2.0 | 15.80 |
| 2.5 | 19.75 |
| 3.0 | 23.70 |
| 4.0 | 31.60 |
| 5.0 | 39.50 |
| 6.0 | 47.40 |
| 8.0 | 63.20 |
| 10.0 | 79.00 |
| 12.0 | 94.80 |
| 16.0 | 126.40 |
| 20.0 | 158.00 |
Weight calculated at stainless steel density 7.90 g/cm3 (weight = thickness in mm × 7.90). Intermediate thicknesses available on request.
Composition limits in weight percent for Grade 304, as required by ASTM A240.
| Element | Composition (%) |
|---|---|
| Carbon (C) | 0.08 max |
| Chromium (Cr) | 18.00 - 20.00 |
| Nickel (Ni) | 8.00 - 11.00 |
| Manganese (Mn) | 2.00 max |
| Silicon (Si) | 0.75 max |
Minimum properties for Grade 304 in the solution annealed condition.
| Property | Value |
|---|---|
| Tensile Strength | 515 MPa min |
| Yield Strength | 205 MPa min |
| Elongation | 35% min |
| Density | 7.90 g/cm3 |
SS Sheets & Plates is specified across the following industries and services:
Custom fabrication, special sizes and complete export documentation are handled in house. Send us your drawing or specification and our technical team will come back with a detailed offer, usually within one working day.